Especially designed for soft materials. Hard materials, e.g. PE, XLPE, HDPE, or hard rubbers partially possible depending on the sample characteristics. To eliminate any doubts, please send samples to iiM AG for evaluation.
- Device is according to the standard IEC 60811 -501, -507 (Heat elongation test, tensile test)
- The samples are taken from the inner side of the sheath and isolator
- All grooves and/ or conductive layers are removed
- Developed to slice samples according to IEC 60811 with a thickness between 0.8 and 2.0 mm (0.04” – 0.08”)