Cable measuring device VCPLab

Video - Cable measurement device VCPLab VCPLab Video

Technical details:

Size (w x l x h) 1150 x 380 x 1070 mm
45.27 x 14.96 x 42.13 Inch
Weight 77 kg / 170 lbs    
Supply Voltage 100 - 240 V / 50 - 60 Hz    
Input Power max. 100 Watt    
Resolution corresponds to 0.1% of the image field    
Lighting LED    
Camera* up to 2 cameras    
Measuring range up to max. 34 mm (1.34“)
outer diameter
Measuring according to standards EN 50396
HD 605
ICEA S-94-649-2000
IEC 60502 -1
IEC 60811 -201; -202; -203
IEC 60840
LV112 (A Factor)

For cable samples with an outer diameter up to 38 mm (1.49")

The cable measuring device VCPLab is a camera-based system for measuring cable geometries from insulations and sheaths. Integrated high resolution sensors allow very accurate measurements of both very thin samples with an outer diameter smaller than 1 mm (0.04“) and cable sheaths with an outer diameter up to 34 mm (1.34").

Device details:

  • Robust case seals against extraneous light
  • Central control unit
  • Manual focussing and illumination
  • Safe from impacts and vibrations
  • Quasi shadow free transmitted light
  • Optimal system status for lighting, optics and camera
  • A measurement with 2 cameras is possible
  • Adjustable operation distance for 2D measurements in laboratories
  • Very precise measurement due to high resolution sensors
  • Standardised individual components
  • Very easy measuring procedure
  • Measurement according to IEC 60811 -201, -202, -203
  • Suitable software VELOX and CAQ-System ProCable available

* the most suitable configuration can only be determined with your minimum and maximum sample outer diameter (OD)

Other cable measuring devices by VisioCabelPro®